Grizzly Industrial

Share on facebook
Facebook
Share on google
Google+
Share on twitter
Twitter
Share on linkedin
LinkedIn
17,121 ratings
4.5/5

Grizzly Industrial Tools

Grizzly G0555 The Ultimate Bandsaw, 14-Inch
  • Deluxe heavy-duty stand
  • Upper and lower ball bearing blade guides
  • All ball bearing construction
  • Includes 3/8-Inch blade
  • Includes fence and miter gauge
  • You won’t find a bandsaw that offers a greater “bang for the buck” than the G0555. The G0555 bandsaw runs very quietly and cuts accurately. The bandsaw has not only the power to do crosscuts and resaw on even thick hardwoods, but also curves, circles and decorative scroll cuts. (If you plan to do a lot of resawing, the G0555XH has larger 1 3/4 HP motor, 12″ resaw capacity and included resaw fence.)
4.8/5
Grizzly Industrial G0531B - 21" 5 HP Industrial Bandsaw with Brake
  • Motor: 5 HP, 230V, single-phase
  • Throat capacity: 20″
  • Height capacity: 14-1/4″
  • Table size: 29-1/2″ x 20-3/4″ x 1-7/8″ thick
  • Table tilt: 5° left, 45° right
  • The G0531B 21″ Industrial Bandsaw offers a 5 HP Totally Enclosed, Fan-Cooled (TEFC) electric motor designed for all day operation, an extra-large 29-1/2″ x 20-3/4″ table made to support large workpieces up to 20″x 14″, and a motor brake that will stop motor rotation in as little as 3 seconds.
4.8/5
Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch
  • Arbor speed: 4 300 RPM • Arbor size: 5/8-Inch; Maximum dado width: 13/16-Inch • Maximum rip capacity: 291/2-Inch
  • Maximum dado width: 13/16-Inch • Maximum rip capacity: 291/2-Inch
  • Maximum depth of cut @ 90-Degree: 3-1/8-Inch • Maximum depth of cut @ 45-Degree: 2-3/16-Inch
  • Motor: 3 HP 220V single-phase Lesson
  • Table height from floor: 34-Inch • Table size with extension: 27-Inch x 40-Inch • Overall dimensions: 62-InchL x 41-InchW x 40-InchH
4.8/5
Grizzly Industrial G0856-8" x 72" Jointer with Helical Cutterhead & Mobile Base
  • Motor: 3HP, 230V, single phase
  • Total table size: 8″ x 72″
  • Fence size: 4-5/8″ x 38″
  • Max depth of cut: 1/8″
  • Rabbeting capacity: 1/2″
  • Cutterhead speed: 5500 RPM
  • Cutterhead diameter: 3-1/16″
  • Number of cutterhead inserts: 36
  • Insert size: 15 x 15 x 2.5 mm
4.8/5
Grizzly G1033X 5 HP Spiral Cutter Head Planer, 20-Inch
  • 2-speed automatic feed gives you better control for rough and finish planning
  • Motor and cutter head have ball bearings which are shielded and lubricated for life
  • Heavy-duty cast iron construction
  • Table is precision-ground to a mirror-like finish
  • Anti-kickback fingers prevent the board from accidentally backing up
  • The large handwheel makes table movement silky smooth and the super rigid pedestal holds the power controls at a convenient height.
  • The extra heavy-duty welded steel base also makes for a very stable machine.
4.8/5
Grizzly Industrial G0766-22" x 42" Variable-Speed Wood Lathe
  • Motor: 3 HP, 220V, 3-phase
  • Required power supply: 220V, single-phase, 20A
  • Swing over bed: 22″
  • Swing over tool rest base (banjo): 18″
  • Swing over tool rest: 16″
  • Distance between centers: 42″
  • 1-1/4″ x 8 TPI RH headstock spindle
  • MT#2 headstock and tailstock tapers
  • Variable speed: 100-3200 RPM
  • Tool rest width: 14″
4.8/5
Grizzly G1026 Shaper, 3 HP
  • Motor: 3 HP, 240V, single-phase, 12A, with reversing switch
  • Precision-ground cast iron table
  • Table with standard wing attached: 30-1/2″ x 28-1/4″
  • Floor to table height: 34″
  • Spindle travel: 3″
  • 3 interchangeable spindles: 1/2″, 3/4″, 1″
  • Spindle openings on table: 1-1/2″, 3″, 4″, 7″
  • Spindle speeds: 7,000 and 10,000 RPM
4.8/5
Grizzly Industrial G0808-20-3/4" Gearhead Drill Press With Cross-Slide Table
  • Motor: 1.5HP, 220V, 3-phase, 1720 RPM, 5.5A with variable frequency drive for operating on single-phase power
  • Swing: 20-3/4″
  • Max distance spindle-to-table: 17-1/2″
  • Max distance spindle-to-base: 42″
  • Table size: 23″L x 7-1/2″W x 1-3/4″H
  • Vertical table travel: 17-3/4″
  • Table swivel: 360°
  • Maximum head tilt (left/right): 30°/90°
  • Spindle travel: 4-7/8″
  • Spindle speeds: Variable, 0-2500 RPM
4.8/5